STANDARD: BS, ASTM, DIN, NFA, JIS, IS

Product Application Area : Power Plants, Desalination Plants, Ship Building & Ship Repair, Heat Exchangers and Radiators, Refineries, Offshore Oil rigs, Condensers, Evaporators, Ferrules, Distillers.

Characteristics : A Copper Zinc Alloy containing Aluminium and small amount of Arsenic which is added as an inhibitor against dezincification. Inhibited Aluminium Brass resists the action of high velocity salt and brackish water and is commonly used for condenser tube. The outstanding characteristic of Aluminium Brass is the high resistance to impingement attack. Tubes of this alloy are recommended for use in marine and land power stations where cooling water velocities are high and where inhibited admiralty brass has failed from impingement. Guide to the selection of tube material: Sea Water: a. Dissolved salts more than 2000 ppm.b. Suspended solids more than 30 ppm.c. H2S or Ammonia is less that 1 ppm.Permissible average velocity of water 2.0 - 2.5 metres/sec.

Product application Areas :
Plumbing,

Characteristics :
A Copper and Zinc Alloy containing small amount of Arsenic. This is added as an inhibitor against dezincification. The alloy exhibits a good combination of strength and ductility and is commonly selected whenever excellent cold working properties, bright finish and relatively low cost are desirable. Severe environment must be considered to predict corrosion behaviour. The alloy is often used for variety of deep drawn components.

Product application Areas :
Hand Pumps, Bore Hole Tubes. bo

Characteristics :
A Copper and Zinc Alloy containing small amount of Arsenic. This is added as an inhibitor against dezincification. The alloy exhibits a good combination of strength and ductility and is commonly selected whenever excellent cold working properties, bright finish and relatively low cost are desirable. Severe environment must be considered to predict corrosion behaviour. The alloy is often used for variety of deep drawn components.