We also manufacture Fin
Tubes that includes copper fin tube and copper alloy fin tube,
these in comparison to plain tubes increases the surface area of
the tube and improves the heat transfer efficiency. We have the
skill & necessary knowhow for the production of integrated
fin tubes & can manufacture the same as per your
requirements.
Met - Gem Fined Tubes
Met - Gem Type 1.
a) S/T is an integral extended surface tube having helical fins
(19,26,40 on the outside & designed primarily for Shell &
Tube Heat exchanger application, to increase efficiency &
reduce cost.
b) Duplex Type S/T Trufin: This is available in a variety of
combinations like (Copper finned tube over a steel liner,
Admiralty finned tube over cupro-nickel liner, Aluminum finned
tube over an Admiralty liner etc.
Met - Gem Type 2
a) S/T Turbo-Chill : Is an integral extended surface tube
having helical fins (19,26,40) on the outside & integral
helical ridges on the inside to improve turbulation, thus giving
more balance outside to inside coefficient ratio & designed
for shell & tube heat exchanger application such as boiling &
condensing of hydrocarbons.
Met - Gem Type 3
a) H/F Trufin : Is an integral extended surface tube having
helical fins on the outside & designed primarily for
application, which require a high outside to inside surface area
ratio such as heating or cooling gases.
Met - Gem Type 4
a) L/C Turfin : Is a bimetallic extended surface tube with high
integral fins, for light weight & economy, finned on prime
surface or liner tube chosen for resistance to a specific
corrosion environment. It has a high outside to inside surface
area ratio for heating or cooling gases. L/C Turfin is available
in any combinations & in four types spirally wounded fin
tubes : 1) Plain type, 2) Crimped type, 3) 'L' type, 4) Wire
wounded
Finned Tubes
-Intergroove Integrally Finned Tubes |
|
No. of starts |
Triple start |
No. of fins/ inch |
19 & 26 |
Type of fin |
Low & high |
Placement of fins |
OD or ID or OD ID |
Dia |
19.05mm & 15.77mm |
Wall |
16SWG, 17SWG, 17.5SWG & 18SWG |
Length |
6 MTRS |
Lands |
As per customer needs |
|
|