Mehta Tubes Limited copper tubes, copper tube fittings, copper tubes manufacturers
Mehta Tubes Limited
Mehta Tubes Limited Mehta Tubes Limited Mehta Tubes Limited
Mehta Tubes Limited Mehta Tubes Limited
Copper Tubes

Watch Video
Mehta Tubes Limited
Mehta Tubes Limited

Flexible and adaptive Mexflow® Copper Cable Terminals
1 | 2 | 3 | 4


Copper TubesCopper Tubes (Air conditioning Systems and Refrigeration Systems)
The Copper tubes that we manufacture are extensively used in Air conditioning systems. The use of copper tube in air-conditioning and refrigeration systems has grown steadily in recent years. This is in large measure due to the inherent properties of the copper metals and their unique abilities to meet the needs of the ACR industry. Stringent new requirements, including demands for increased operating efficiency and the reduction or elimination of harmful emissions, have led to a new appreciation for copper tube's role in product enhancement.

Product Specifications -
Weight Calculation
(OD-WT) x WT x 0.0281 = KGS/ MTR

{short description of image}
Plain Tubes
Outer Diameter 4.76mm to 150mm
WT 0.35mm to 3.0mm
Straight length Upto 6 MTRS
Connecting Tube Coil Sets for Split ACS
Outer Diameter 4.76mm to 19.05mm
Length 5 MTRS or as per customer's requirement

Pancake Coils Single Layer
Outer Diameter 4.76mm to 19.05mm
Wall 0.41mm & 1.24mm
Length 15 MTRS

Internally Grooved Tubes
Outer Diameter 9.52mm
Wall 0.35mm & 0.30mm
No. of grooves As per Japaneses standards

Double Layer
Outer Diameter 4.76mm to 19.05mm
Wall 0.41mm & 1.24mm
Length 15 MTRS & 30 MTRS

Double Layer
Outer Diameter 1.5mm to 3mm
Wall 0.30mm & 0.6mm
Length Straight lengths as per customer needs

Plain Tubes

Copper TubesCopper Tubes for Water and Gas (Mexflow® Copper Tube)
Copper Tube to BS EN 1057 - R250 (Previous Designation BS 2871: Part 1: Table X) Half Hard Straight. This products is supplied in 3 or 6 meter straight lengths in the half hard condition, an ideal temper for cold bending and forming. Mexflow Tubes can be easily bent on an appropriate bending machine for 6 to 22mm O.D. sizes, with a bending spring. Its ease of manipulating and relatively light weight, combine with its ability to withstand high internal pressure makes Mexflow the ideal products for most hot and cold water, central heating and gas services installations.

This is the general-purpose copper tube for above ground services. Ideal for Drinking Water, Central Heating, Sanitation, Hot and Cold Water, Industrial & Medical Gas Transportation, Various Engineering.

Sizes mm 6 8 10 12 15 22 28 35 42 54 66.7 76.1 108 133 159
Max. Mean
O.D. mm
6.04 8.04 10.04 12.04 15.04 22.05 28.05 35.06 42.06 54.06 66.77 76.17 108.07 133.2 159.2
Min. Mean
O.D. mm
5.96 7.96 9.96 11.96 14.96 21.95 27.95 34.94 41.94 53.94 66.63 76.03 107.93 132.8 158.8
W.T. mm 0.6 0.6 0.6 0.6 0.7 0.9 0.9 1.2 1.2 1.2 1.2 1.5 1.5 1.5 2
Max. W.P.
(65C) Bar
133 97 77 63 58 51 40 42 35 27 20 24 17 14 15

Also as per BS EN 1057-R220
(Previous Designation BS 2871: Part 1: Table Y) Supplied as either 6m long half-hard straight lengths, or annealed 25m or 23m long coils. With a wall thickness approximately 1.5 times thicker than "Mexflow", it is the ideal product for underground applications. The extra wall thickness also allows its use on certain pressurized stem installations with maximum working temperature of 65°C. These copper tubes are recommended for use on underground services and are also suitable for: Drinking Water, Central Heating, Sanitation, Gas, Various Engineering Applications.

Mexflow Copper Pipes are available with IBP Conex fittings for the complete Copper Plumbing solution.
{short description of image}

Plain Tubes

Copper TubesCopper Tubes for General Engineering
Copper Tubes, manufactured by us, can also be used for general engineering. In residential buildings and small one- and two-story commercial buildings, the drainage piping is usually straightforward in design and simple in installation. Type DWV copper tube, installed with good workmanship by an experienced plumber, will provide many years of trouble-free service.

Copper DWV tube has been used successfully for years in all parts of drainage plumbing systems for high-rise buildings-for soil and vent stacks and for soil, waste and vent branches. Copper tube's lightweight and the ease with which it can be prefabricated have been especially important in high-rise drainage systems.

Copper Tubes for General Engineering
B.S. 2871 Part 2/72 C 106
Near Equivalent specification IS 2501/ 77 DHP

Physical Properties:
Condition Tensile strength N/mm2 % Elongation on 5.65 A Min.
Annealed 200-250 40
Half Hard 250 Min 30
As Manufactured 280 Min
Chemical Requirements:
Copper Tube (Incl. Silver) 99.85% Min.
Phosphorus 0.013 to 0.5%
Total Impurities 0.06% Max.

Plain Tubes
Copper TubesCopper Pipe
We supply and export Copper Pipes in different specification.

  • Air conditioner
  • Water Heater
  • Oil cooler Pipe
  • Refrigerator

Other Details:
  • Range: 1½” OD to 6” OD in 22swg, 20swg, 18swg, 16swg, 14swg, 12swg, 10swg
  • Length: Single Random and Required Cut Length
  • End: Plain End

Plain Tubes
1 | 2 | 3 | 4


Mehta Tubes Limited

Looking for Product Name ?